REGULAR VERSION
Table Measurements: 90 H x 56 W x 46 D. cm. Marble measurements: 56 x 46 x 4 wide, cm.
ANTI-VIBRATION TABLES FOR LABORATORIES
Anti-vibration table with regulated electrical connection, reinforced sides in coldrolled steel sheet with anti-reactant resin to eliminate external noise, passive damping.
Ref: NLD-1007
- MARBLE meson
- High
- Filters with density gradient for vibrations of different
- Suitable for conditions
- Protected against agents
- Easy to install
- 4 Levelers or feet
- Carbon steel legs with leveling system
- It successfully dampens transverse and longitudinal oscillations, manufactured under 17025 standard parameters
- Installation qualification, IQ (for certified furniture)
- Produced under the parameters of the NTC ISO 17025 standard and decree 3075
- Approved furniture that corrects the inherent risks in accordance with Chilean MINSA’s DS.594/99.
- Manufactured according to DIN 1946 ISO 17025
STRUCTURE:
18 gauge COLD ROLLED STEEL
Structure with square section of 50X50 manufactured in steel pipe cold rolled square 2X2 caliber 18 according to ASTM-A-500 Grade C, welded joints and coating in gray electrostatic epoxy paint, resin paint or galvanic coating + Epoxy-Polyester.
Table measures: 90 H x 56 W x 46 D. cm.
PRO VERSION
Anti-vibration table with reinforced sides in chipboard coated with anti-reactant resin to eliminate external noise and passive damping. Internal structure in steel and self-supporting tray with NR-VIBER compound.
Ref: NLD-1008
- MARBLE meson
- High
- Filters with density gradient for vibrations of different
- Suitable for conditions
- Protected against agents
- Easy to install
- 4 Levelers or feet
- Carbon steel legs with leveling system
- It successfully dampens transverse and longitudinal oscillations, manufactured under 17025 standard parameters
- Installation qualification, IQ (for certified furniture)
- Produced under the parameters of the NTC ISO 17025 standard and decree 3075
- Approved furniture that corrects the inherent risks in accordance with Chilean MINSA’s DS.594/99.
- Manufactured according to DIN 1946 ISO 17025
STRUCTURE
18-gauge RH AGGLOMERATE
Structure with square section of 50X50 manufactured in 2X2 RH tablex board of 18 gauge according to ASTM-D-800 Standard, joints veneered in thermo-veneered PVC edge.
STANDARD SIZE
Table Measurements: 90 H x 56 W x 46 D. cm.
Marble dimensions: 45 x 30 x 4 wide, cm.
Ref: Al700HL
NR-VIBER A-Series NR-VIBER Technology 4» X 4» X 7/8» Rubber Anti-Vibration Pads
Features:
NR-VIBER rubber is the best anti-vibration pad for heavy duty applications.
The structure is the best and most recent anti-vibration design on the market. It is flexible and resistant at the same time for vibration isolation. These anti-vibration pads are an excellent vibration dampener with a load capacity of 60 psi.
Ribbed rubber design to provide increased friction.
Ref: Al700PL10
Anti-vibration rubber B Series Ref: Al700PL 60 x 80 mm
Features:
Made of high quality, durable Nitrile rubber for high performance and insulation.
Micro-grip pattern on the underside of each pad that adheres firmly to the surface.
Can provide improved constant (Kd/Ks) and lower hysteresis in anti-vibration applications compared to traditional farbricated wedges in accordance with (ASTM) N500, N600 standards.
Contact your local office
(57+1) 703 9578
(57+1) 801 0548
Mobile: (57) 301 752 47 42
Mobile: (57) 315 643 42 11
Carrera 57 # 4D - 72
Bogotá, D.C - Colombia .